Tempest Blazers – WIP – Horses
In preparation for an upcoming Journeyman League, I wanted to add the Tempest Blazers to my list as an excuse to buy, paint and play them. For those unfamiliar, the Tempest Blazers are a unit of Gun Mages mounted on horseback. Each horse it made of three pieces: a left half, a right half and a head. There are two styles of horses and two styles of heads. The heads and bodies are interchangeable giving you 4 different horses, out of the max unit of 5.
Cygnar’s Tempest Blazer unit
The horse halves fit together okay, though I took some plastic sanding needles to them to help smooth out the top joint. The heads however, have a very large gap all around as shown in the picture below on the top horse. I’m not great at assembly and my sculpting is limited to the pouches I made in the last post. But the joint was so bad I knew I couldn’t possibly make it worse.
Tempest Blazer Horses – Raw neck joint (top), grey staff gap filling (bottom)
I mixed up some grey stuff and rolled a portion out into a long thin cylinder. I then wrapped it around the joint, cutting off the excess and pressing it into the gap. From there I got out a sculpting tool and proceeded to smooth the grey stuff out, forward and backward, to cover the gap and try to seamlessly smooth out that gap. As you can see in the bottom horse, it came out really well. The proof will be once it’s primed and painted, but it’s certainly far better than the initial gap.
The top joint for the horse half came out well on all of them, so that wasn’t and issue, but I did use the same technique to patch up the seams at the back and bottom of the horse halves.
